Typical overland conveyor installation with 0.6BMT profiled Custom Blue Orb Cladding from Lysaght / Fielders and Rolled Stringers (nominally 1.9 BMT) from Australian Roll Forming. Heavier BMT can be supplied for stringer mounted equipment.

Cross Over designs allow easy maintenance access to each idler with maintenance vehicles. 

LED lighting supplied with Swivelpole or Phoenix Ultraswing products.  

Big Roller Concrete Sleeper designs are supplied by RECO Precast. Modules can be mounted to alternative foundation types (bored pier, slab, slab and pedestal, slip form paving or truss structure). Alternative designs are by others.

Typical Pull Wire Switch arrangement

Design includes B&R cabinet, Kiepe Pull Wire Switches and Yodelarm Warning Siren / Light. Designs can be tailored to client preferred equipment requirements and EI&C designs. 

Note: Stringers have ELV and LV power on one side and Fibre Optic and Communications cabling on the other. 

Bottom entry cable glands are Nylon for Fibre Optic and Data Cables and Nickel coa

Typical Belt Drift Switch arrangement

Design includes B&R cabinet and Kiepe Belt Drift Switches. Designs can be tailored to client preferred equipment requirements and EI&C designs.

Fibre Optic Loop and Network Switch design for long fibre runs. Design includes B&R cabinet for installing Fibre Optic Network Switches. Designs can be tailored to client preferred equipment requirements and EI&C designs.

Typical Pull Wire (Pigtail) support bracketry

Pigtail spans at 3.4 meters are designed to comply with AS1755 i.e. 70N at maximum of 300mm motion at mid support location or 230N along the line to activate the switch. 

Composite Return Rollers are positioned on opposing sides of legs within modules to reduce belt flap.